Fantastic bike will be sad to see it go, only reason I'm selling is because i have no time to ride and it's a shame for it just to sit there. Bike has recently been fully serviced including new pivot bearings, fork service, new headset bearings, new bottom bracket, new chain and new cables in and out. Most of the standard components have been upgraded making it an awesome machine to shred. Spec is as follows :- Carbon fibre front triangle with a n alloy rear. Frame is in good condition with the usual one or two battle scars you'd expect from a used bike. There are two grooves on the underside of the BB shell from cable rub. I've had this area inspected by a local carbon fibre specialist and they told me this would not effect the integrity of the bike in anyway and just to fill the grooves with epoxy resin. Cables have now been re-routed to prevent this happening again. (Please see pics) Fox Factory 34 Forks recently serviced, new decals fitted and travel increased from 140mm to 160mm. Minor damage to kashima coating, has been repaired to prevent it effecting the performance of the fork but still slightly visible. (Please see pics) Brand new Fox Factory DPX2 Shock fitted to the rear. With 150mm of travel, only used a handful of times but i can tell it one awesome piece of kit. Hope Enduro Tech 27.5" wheel-set built around Hope Pro 4 hubs. Schwalbe Magic Mary upfront and a Schwalbe Hans Dampf at the rear. Both running tubeless setup. Hope Tech 3 E4 brake setup, finished off with a Hope 180mm rotor at the rear and a 203mm at the front. Renthal Carbon bar with a Hope 50mm zero degrees stem. Sram XO1 Carbon Crank with a 32T superstar component narrow win chainring. Crank Brother pedals E-Thirteen Chain guide. Box one shifter, derailleur and cassette. (11-46 11 speed) Bontrager dropper post. (can stick if not used regular) Plus lots of other little finishing touches, all colour coded to make what I think is a fantastic looking bike that gets lots of attention out on the trails.